To purchase custom air-conditioning motor magnetic rings, please contact the courage permanent magnet manufacturer in China. Our company can provide magnetic rotor ring magnets for air-conditioning motors of various materials, and can also be customized according to customer needs. Customers who need samples may wish to consult us.
Guess what you are concerned about: What are the magnetization methods of injection-molded magnets?
Mainly axial or radial multi-pole magnetization, including inner and outer charging.
The working temperature of the injection-molded magnet;
The maximum operating temperature of injection-molded magnets depends on the magnetic powder and binder used. For example, ferrite powder combined with nylon 6 or PPS can pass the test at 180°C. Nylon 12 melts when it is above 170°C, so if the design temperature of the magnet exceeds 150°C, nylon 12 is not recommended. Taking the iron-iron-boron magnetic powder with higher magnetic energy product as an example, if its intrinsic coercivity is 9500 oersteds (760kA/m), no matter which binder is used, the magnetic properties of the material will be higher than 120C. There will be significant irreversible losses. The maximum service temperature for each material is listed in the product performance table.
You may also be looking for the following magnets;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This sample is a speed measurement magnet, an AC geared motor multi-pole ring magnet, made of sintered ferrite, the magnetization method is radial 24 poles, the magnet size is 22.5mm in outer diameter, 12mm in inner diameter, and 6.5mm in thickness. Qi magnet manufacturers provide,...
You are now viewing this is a bonded molded NdFeB magnet, ring shape, ring OD 38mm, hole 29mm, height 20mm, surface black epoxy coating, the magnetization is through the radial multi-pole magnetization, there are 10 poles, 5 N-pole, 5 S-pole....
You are now seeing the specifications of this magnet ring OD 13mm, bore diameter 8mm, thickness of 3.5mm, the surface of the black epoxy, due to the reason of the photo may look like a ferrite, the actual bonded ring magnets, suitable for a variety of types of motor, sensor, and electric appliances....
This is a large-sized multi-pole ring magnet, which was originally shot by Chinese magnet supplier Courage Xiaofu. If you see it in other websites, it is completely copied from us. The size of this magnet is 70.2mm in outer diameter, 51.83mm in inner diameter, and 28mm in thickness (height). The largest magnetic surface is on the outer side of the ring...
This is a multi-pole neodymium magnetic ring made of bonded NdFeB material, hollow cylindrical with 6 poles, radial distribution of 3N3S, outer diameter 12mm, center hole 8mm, height 20mm, surface magnetic strength of about 1750 gauss...
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....
This is a single-sided multi-pole magnetized ring magnet, only one side is magnetic, there are 4 poles on the surface, 2 N-pole, 2 S-pole, the material is injection molded ferrite, the outer diameter size of 17mm, the thickness of 4.5mm...