0769-23388351
Toggle Navigation
This product is a rectangular magnet with countersunk screw holes made of sintered NdFeB. The size is 25mm long, 13mm wide and 3mm thick. It is N35 grade. If it is not the same as what you want, we can also directly process it according to your size without expensive mold costs, welcome to consult.
In addition to this magnet with one hole, some magnets are also requested by customers to process multiple holes, which can be square, triangle, ring, arc, and irregular shapes. Welcome to provide drawings or data to us for price.
Magnet of similar shape;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This is a diameter (radial) magnetization of small size ring magnet, material is sintered neodymium iron boron, performance grade is N48, is customized according to customer requirements, outer diameter of 7mm, hole 3mm, thickness of 3mm....
This is a small radial magnetic ring made of NdFeB N42 grade material, hollow cylindrical, OD 3mm, hole 1mm, height 3.2mm, radial magnetization, the product weighs about 0.15g, nickel-copper-nickel treatment, ±0.05mm tolerance, mainly used for vibration motors...
This is a neodymium material N38 grade made of a small ring-shaped powerful magnet, magnetic ring outer diameter of 5mm, hole 2mm, thickness of 1mm, through the axial magnetization, the product weighs 0.124g, the center of the table magnetic strength of about 2150 gauss....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
Most of the epoxy magnets we have seen are black, that is, black epoxy magnets. In fact, it can also have other colors, such as gray, red, blue, green, etc. If you like this kind of magnet, please give us feedback. The size and performance grade can be customized....