0769-23388351
Toggle Navigation
Name: Rare earth permanent magnet NdFeB strong round magnet
Material: NdFeB
Shape: round disk
Specifications: diameter 6mm thickness 5mm (size and shape can be customized)
Registration: N35 (various performance magnets can be customized)
Plating: Nickel plating (various plating can be customized)
Maximum working temperature: <80℃
Uses: Can be used for magnetic therapy, office, adsorption paper clips, adsorption pins, photo drawings and other whiteboard fixing, industrial toys, door suction, luggage, packaging boxes, photo frames, personal interests, scientific experiments, etc.
Reminder: Because of the characteristics of NdFeB strong magnetic material: hard, brittle, strong magnetic field, it should be handled with care (especially large size and thin slices), when the strong magnet itself or other iron objects are attracted or separated, be careful. Unbeatable! Otherwise, it is easy to damage the magnet or pinch fingers due to collision!
Points to note when taking neodymium magnets:
For magnets with better magnetic properties and firmer suction, please fix the whole magnet with your left hand, and use your index finger and thumb to cooperate with your right hand, and remove the magnet horizontally. Immediately isolate the magnet. Handle with care, keep away from iron or magnetic objects (about 15 cm) or wrap the removed paper with paper, so as to be safer. If you need to put the magnet back into the whole magnet, please put it back slowly, starting from the edge at close range. Be sure to hold the magnet in your hand until the magnet has moved in.
If you need a smaller size magnet, please click Strong Small Ndfeb Magnet to view.
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
Most of the epoxy magnets we have seen are black, that is, black epoxy magnets. In fact, it can also have other colors, such as gray, red, blue, green, etc. If you like this kind of magnet, please give us feedback. The size and performance grade can be customized....
This product is a customized countersunk magnet ring, made of rare earth neodymium iron boron, 17mm outer diameter, black nickel plating on the surface, compared with ordinary nickel plating....
This is a medium and large size countersunk square magnet, made of rare earth neodymium material, with strong magnetic field strength, magnet length and width size is 40mm, thickness 10mm....
You are now viewing this is a high grade (N50) hollow cylindrical magnet with a through hole drilled in the middle of a cylindrical neodymium magnet, OD size 7.5mm, hole 3mm, height 30mm....