0769-23388351
Toggle Navigation
This product is a neodymium magnet block, N52 grade, the size is length 50mm, width 25mm, thickness 10mm, tolerance ±0.1mm, the coating is nickel, magnetized through 10mm thickness direction, the pulling force is about 33kg.
50x25x10mm magnet partition board test
Other 50mm Neodymium Block Magnets；
50mm neodymium bar block magnet 50x5x5mm
Matters needing attention
The maximum temperature resistance of N52 is 80, please use it less than the working environment.
Magnets of this size have a strong magnetic force, be careful when using them and keep them away from children!
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
Most of the epoxy magnets we have seen are black, that is, black epoxy magnets. In fact, it can also have other colors, such as gray, red, blue, green, etc. If you like this kind of magnet, please give us feedback. The size and performance grade can be customized....
This product is a customized countersunk magnet ring, made of rare earth neodymium iron boron, 17mm outer diameter, black nickel plating on the surface, compared with ordinary nickel plating....
This is a medium and large size countersunk square magnet, made of rare earth neodymium material, with strong magnetic field strength, magnet length and width size is 40mm, thickness 10mm....
You are now viewing this is a high grade (N50) hollow cylindrical magnet with a through hole drilled in the middle of a cylindrical neodymium magnet, OD size 7.5mm, hole 3mm, height 30mm....