0769-23388351
Toggle Navigation
Magnet name: Nd radial ring magnet with diameter of 24mm
Magnet material: rare earth neodymium
Specification of magnet: diameter 24mm, aperture 5mm, height 33.5mm
Direction of magnetization: radial
Magnet shape: cylindrical
Magnet type: hollow cylindrical magnet, cylindrical magnet with hole
Magnet grade: N35-N52 (other high temperature resistant grades)
Surface coating: nickel
Tolerance: plus or minus 0.05
Maximum temperature resistance: less than 180 ℃
Packaging: foam board+carton or customized
Magnetic field strength: Higher than 4000 gauss
24 x 5 x 33.5mm radial neodymium ring magnet sample image
Understand the preferential price please send us an inquiry oh, For special magnet needs please enter custom shaped neodymium strong magnets.
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
Most of the epoxy magnets we have seen are black, that is, black epoxy magnets. In fact, it can also have other colors, such as gray, red, blue, green, etc. If you like this kind of magnet, please give us feedback. The size and performance grade can be customized....
This product is a customized countersunk magnet ring, made of rare earth neodymium iron boron, 17mm outer diameter, black nickel plating on the surface, compared with ordinary nickel plating....
This is a medium and large size countersunk square magnet, made of rare earth neodymium material, with strong magnetic field strength, magnet length and width size is 40mm, thickness 10mm....
You are now viewing this is a high grade (N50) hollow cylindrical magnet with a through hole drilled in the middle of a cylindrical neodymium magnet, OD size 7.5mm, hole 3mm, height 30mm....