0769-23388351
Toggle Navigation
Quality, quality, or quality, the most important thing for customers of customized magnet processing is the quality and accuracy of the magnet supplier, so they all hope to find a good magnet processing factory. Many customers have been tossed by inferior magnet suppliers, and now they don’t want to suffer anymore. Cheap magnet processing services really cannot be bought.
A few days ago, a customer looking for high-strength magnet processing found a quotation from our factory. The other party sent their product drawings and asked if we could ensure the magnetic field strength he required. Is this processing material expensive? After analyzing the performance requested by the customer, we provided a quotation. The customer felt that it was a bit high because he had asked other companies before. We explained that we are not the first price here, but the quality is guaranteed, and it is also a conscientious price. Now the prices of NdFeB and ferrite materials have increased quite a lot.
The picture below shows a rectangular neodymium magnet with counterbore
The other party no longer struggles with the price, and only hopes that the quality of the magnet is better. Now we have cooperated several times.
Note: NdFeB strong magnetic magnets are divided into many performance grades. The conventional spot is the general standard performance of the factory. If you need high-performance products, please contact customer service for quotation.
Other magnet products with counterbore;
This product is round ferrite magnet with a diameter of 9mm and a thickness of 3mm, the performance class is Y30, magnetized in the thickness direction, without electroplating protective layer, the magnetic force is usually 700-1000gs, the working temperature is -40°C to +250°C, Suitable for sensors, suction parts, electrical appliances, Hall induction....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
This is a C8 grade ceramic ferrite block rectangle, with white marks made according to the customer's requirements. The magnet size is 13mm long, 11mm wide and 10mm thick. If you are interested in such a magnet, you can contact us to provide you with samples, prices,...
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....