0769-23388351
Toggle Navigation
Multipole magnetic ring ( multipole ring magnets ) is a kind of ring magnet used in the field of motor. It means that a magnet is filled with many magnetic poles, larger than 2 poles. Generally, a professional magnetizing coil is used for magnetizing. Each magnetizing coil is normally filled with a magnetic ring of a specification.
The above is an introduction to what is a multipolar ring magnet, and what are its material types? Here is a brief introduction.
According to the different materials, the multipolar magnetic rings can be divided into neodymium multipolar magnetic ring, ferrite multipolar magnetic ring, rubber multipolar magnetic ring and samarium cobalt multipolar magnetic ring. The first three kinds are relatively common.
Among the above multipolar magnetic ring materials, the most powerful one is the multi-stage magnetic ring of NdFeB magnet material. Among the magnets, NdFeB magnet, known as "king of magnetism", has a high remanence. In the multipolar magnetic ring, the magnetic force of the same specification and pole is also the strongest. It is mainly used in the field of high performance permanent magnet motor and sensor. In addition, according to the different process, the NdFeB multipolar magnetic ring can be divided into sintered NdFeB multipolar ring and bonded NdFeB multipolar magnetic ring.
The cost of rubber magnetic multipole ring and ferrite multipole ring is relatively low, but the magnetic force is also relatively weak. At present, the most widely used products are round magnetic grid, water pump motor, sweeper, etc.
Samarium cobalt multipole magnetic ring is the highest temperature resistant multipole magnetic ring. The highest temperature of this material can reach 350 degrees, which is the best magnet used in high temperature environment.
As for the number of poles of multi pole magnetic ring, it is also different according to different customers, and the maximum can be hundreds of poles.
If you have multipole magnetic ring quotation, sample, or questions, please contact us.
Related multipole ring magnet column;
Injection Molded Ferrite Magnets
More articles on multipole ring magnets;
Which products are radial multipole ring magnets mainly used in?
This product is round ferrite magnet with a diameter of 9mm and a thickness of 3mm, the performance class is Y30, magnetized in the thickness direction, without electroplating protective layer, the magnetic force is usually 700-1000gs, the working temperature is -40°C to +250°C, Suitable for sensors, suction parts, electrical appliances, Hall induction....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
This is a C8 grade ceramic ferrite block rectangle, with white marks made according to the customer's requirements. The magnet size is 13mm long, 11mm wide and 10mm thick. If you are interested in such a magnet, you can contact us to provide you with samples, prices,...
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....