0769-23388351
Toggle Navigation
The magnetic strength of the magnet can have an effect on the performance of the motor, especially for DC motors and stepper motors. The following are some of the main effects of the magnetic strength of the magnet on the performance of the motor.
1, Affect the magnetic field strength of the motorThe greater the magnetic field strength of the magnet, the higher the output force and efficiency of the motor is usually also higher, the stronger the magnetic field can provide more torque and power output.
2, Affect the maximum speed of the motorThe magnetic strength of the magnet can affect the maximum speed of the motor. Stronger magnetic fields usually result in higher maximum speeds. In addition, the control performance of the motor is also affected by the magnetic strength, including acceleration, deceleration and positioning accuracy.
3. Influence the response speed and dynamic performance of the motorStronger magnetic fields usually provide faster response times and better dynamic performance.
Matching picture is arc segment trapezoid ferrite magnet, multi-piece collocation ring
4, Affect the efficiency of the motorStronger magnetic fields can reduce the reluctance of the motor, thus improving the efficiency of the motor.
5, Affect the thermal performance of the motorStronger magnetic fields may cause the motor to heat up more, so it needs a better heat dissipation system.
The use of stronger magnets can also reduce the size of the motor, with a more compact structure, the appropriate use of stronger magnetic magnets is conducive to the motor to obtain better performance.
It should be noted that the magnet's magnetism is not the only factor that affects the performance of the motor, the design of the motor, winding, power supply and external environment and other factors will also have an impact on the motor performance. Therefore, when selecting magnets, these factors need to be considered comprehensively, and according to the specific application to determine the magnetic strength requirements.
Types of magnets commonly used in permanent magnet motors;
Introduction to related motor magnets;
Commonly used types of magnets in starter motors - Ferrite
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....