0769-23388351
Toggle Navigation
Some customers have clear requirements for the gauss value of the magnet. A few days ago, a customer inquired about the purchase of a magnet with a gauss of more than 5000 gauss, and asked us to recommend the size of the magnet, and also wanted to know the size of the suction force.
How strong is a 5000 gauss magnet? How strong is the suction?
There are many similar questions, such as how many Gaussian magnets can attract heavy things, how many Gaussians can magnets attract and how far? There are also questions such as how much suction does a 3000 4000 gauss magnet have, etc. These are very unprofessional questions, why?
Because the gauss of a magnet and how much it can absorb, how far it can be absorbed, etc. are not computational, it is not that the larger the gauss of the magnet, the greater its attractive force, how much the magnet can absorb, and the size, shape, and magnetization method of the magnet. What is the suction method (horizontal suction? Vertical suction?) A single surface Gaussian value cannot explain any problem.
Some friends may not understand, here is an example: For example, there is a small magnet of 5000GS, which can absorb 0.8KG, and a large magnet with only 1000GS surface magnetism, but it can absorb 100KG, so the volume (contact surface) of the magnet is also related to the suction force. related.
Written at the end: the same magnet specifications, the larger the surface Gauss value, the stronger the magnetism.
Conclusion;
The 5000 Gauss magnet can only be satisfied by the neodymium magnet material. The size of the attractive force depends on the size of the magnet. The larger the size of the magnet, the stronger the magnetic force. In general, this field strength is easier to achieve with N50 and N52 grades, but only if the diameter is not too large and the thickness is not too thin.
If you need to customize or buy NdFeB high-strength magnets, 5000 Gauss magnets, be sure to contact us, cost-effective, good quality, you will not be disappointed!
Circular Rare Earth Magnet Magnetic Field Strength Calculation: https://www.dgcourage.com/about/round-magnetic-field-strength/
Similar magnet problems;
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
This is a single-sided multi-pole magnetized ring magnet, only one side is magnetic, there are 4 poles on the surface, 2 N-pole, 2 S-pole, the material is injection molded ferrite, the outer diameter size of 17mm, the thickness of 4.5mm...
This product is a customized countersunk magnet ring, made of rare earth neodymium iron boron, 17mm outer diameter, black nickel plating on the surface, compared with ordinary nickel plating....
This product is a radial multi-pole ferrite rotor magnetic ring, photographed by Xiao Fu, a Courage magnet manufacturer in China. The magnet has 12 magnetic poles, 6 N poles and 6 S poles, and the magnetic field intensity can reach 1700 Gauss. The specific size of the magnet is 18mm outer diameter, 10mm aperture and 17.5mm height, and it is mainly used for permanent magnet DC motor....
This is a samarium-cobalt round magnet with counterbore. The size is 15mm in outer diameter, 5mm in thickness, magnetized in the thickness direction, and no other coating on the surface. Customers who need our quotation for you are welcome to consult and can be customized....
This is a medium and large size countersunk square magnet, made of rare earth neodymium material, with strong magnetic field strength, magnet length and width size is 40mm, thickness 10mm....
This is a thin ferrite magnet sheet customized for American customers not long ago, hard permanent magnet, rectangular shape, no plating on the surface, black, length 40mm, width 20mm, thickness 1mm, magnetization through the thickness of 1mm direction....
This product is a small-size circular ferrite magnet with a diameter of 10mm and a thickness of 2mm. It is magnetized with thickness and no other treatment on the surface. It is suitable for electronic products, industry and induction devices. If you need to process ultra-thin ferrite magnets, please contact us for quotation....