0769-23388351

10x20mm Ferrite Cylindrical Magnet Y35

The magnet products on this website are all directly sold by the Courage Magnet Factory. If you want to wholesale ceramic ferrite magnets in large quantities, you can contact us to support customization of various specifications and performances, and sincerely look forward to cooperating with you.
Products Inquiry

PRODUCT INFORMATION

Product name: 10mm diameter 20mm thick ferrite cylinder

Magnet shape: cylindrical

Magnet type: Permanent magnet hard magnet

Magnet grade: Y35

Surface treatment: none

Product material: ferrite.

Magnetization direction: radial (can be axial)

Environmental certification: Rosh SGS certification.

Product features: low unit price, high temperature resistance, corrosion resistance, not easy to demagnetize.


The magnet products on this website are all directly sold by the Courage Magnet Factory. If you want to wholesale ceramic ferrite magnets in large quantities, you can contact us to support customization of various specifications and performances, and sincerely look forward to cooperating with you.


Near size ferrite cylindrical magnet;

6x25mm Radial Ferrite Cylindrical Magnet

Electric retractable door ferrite magnet cylindrical 22 x 22 mm

DATA DOWNLOAD

Ferrite grade, sintered ferrite magnetic property parameter table

NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table

Neodymium(Ndfeb) Magnet Material Safety Data Sheet

Sintered Ferrite Material Safety Data Sheet Pdf

Magnetic properties grade parameters of smco rare earth magnets

RECOMMEND SIMILAR PRODUCTS

Injection molded ferrite magnetic rotors for permanent magnet motors

This is a multi-pole ferrite magnetic assembly, composed of injection molded ferrite + shaft, also known as injection molded ferrite magnetic rotor magnet, rotor OD 29.8mm, height 7.5mm, shaft 3.17mm...

Hole 60mm sintered ferrite magnet ring y25 120x60x20mm

You are now viewing a ceramic ferrite ring magnet with 60mm bore (center hole), 120mm outer diameter, 20mm thickness, medium to large size magnet, no plating on surface, especially suitable for speakers, horns, salvage, fishing, and mechanical equipment,...

Y30 C8 Ferrite Disc Magnets 18mm x 8mm 1320 gauss

Product is a Y30 (C8) grade round ferrite magnet, the N pole has a pit, the surface magnetic field strength is about 1300 Gauss, the specific size is 18mm in diameter, 8mm in thickness, magnetized in the thickness direction, and the tolerance is ±0.1mm....

4" Ferrite magnet ring C8 OD 110mm ID 50mm T 6mm 110x50x6mm

You are now browsing this is a 4 inch ceramic ferrite ring magnet, by the courage magnet manufacturers physical samples photographed, magnetic ring outer diameter 110mm, hole 50mm, thickness 6mm....

Dia 18mm x 3mm Thick Anisotropic Ferrite Disc Magnet

Product name :Dia 18mm x 3mm Anisotropic Ferrite Disc Magnet。Main Features: It has the advantages of good anti-demagnetization performance, low cost, and not easy to corrosion, among which the isotropic sintered ferrite permanent magnet material is weak in magnetism...

13.5mm O.D. x 10mm I.D. x 4mm Thick Y10 Isotropic Ferrite Ring Magnets

This product is a ring ferrite magnet with an outer diameter of 13.5mm, an inner diameter of 10mm, and a thickness of 4mm. The grade is Y10, the surface magnetic field strength is about 650 Gauss, and the magnetism is not very strong....

Ceramic magnet blocks for accessories 43x10x8mm Y30BH

Need to buy black cheap ceramic ferrite magnet with good corrosion resistance, you can contact us, support customization of various properties and sizes, you now see this size for the length of 43mm, width of 10mm, thickness of 10mm...

20x10mm round ceramic ferrite magnet with chamfered edges

This is a round magnet made of sintered ceramic ferrite material, diameter 20mm, thickness 10mm, although not as strong as neodymium material, but for general application is enough, the disk magnet also according to the customer's requirements with edge chamfering....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

EMAIL US