0769-23388351
Toggle Navigation
Bonded NdFeB magnets are made of permanent magnet powder mixed with adhesive materials such as rubber or hard and light plastic, and are directly formed into permanent magnet parts of various shapes according to user requirements, mainly ring-shaped.
The magnetic properties of bonded NdFeB magnets are not as good as those of sintered NdFeB magnets, but they are easy to manufacture multi-stage magnetized ring magnets, have excellent performance consistency and uniformity, and are easy to form integrally with other metal or plastic parts. , which is much higher than the magnetic properties of bonded ferrite, and is widely used in various micro-motor and sensor systems. The specific uses of bonded NdFeB can be divided into:
Digital Products: Hard Disk Drive Magnets (HDD) - This is currently the largest application area for bonded NdFeB.
Office OA products: drive motors for printers, motors for scanners, synchronous feed motors (STP) for copiers, magnetic rollers for laser printers, etc.
Automotive motor and magnetic sensor products: including EPS power steering sensor magnets, wiper motors, window motors, seat adjuster motors, etc.
Other types of industrial and household motors: mainly include various types of servo motors, motors for power tools, air-conditioning refrigeration motors, etc.
Our company has accumulated a lot of bonded neodymium ring magnet molds. Welcome to tell us the size of the magnet and the number of magnetization poles you need, If you need technical support about magnets, we could offer a one-stop magnet solution with high efficiency.
More multi-pole magnetized bonded magnet samples: https://www.dgcourage.com/zhuanti/bonded-neodymium-magnets/
Introduction of articles about bonded neodymium magnets;
Bonded vs sintered neodymium magnets
Magnetization Direction of Bonded Neodymium Magnets
Causes and influences of unsaturated magnetization bonded NdFeB magnets
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This sample is a speed measurement magnet, an AC geared motor multi-pole ring magnet, made of sintered ferrite, the magnetization method is radial 24 poles, the magnet size is 22.5mm in outer diameter, 12mm in inner diameter, and 6.5mm in thickness. Qi magnet manufacturers provide,...
You are now viewing this is a bonded molded NdFeB magnet, ring shape, ring OD 38mm, hole 29mm, height 20mm, surface black epoxy coating, the magnetization is through the radial multi-pole magnetization, there are 10 poles, 5 N-pole, 5 S-pole....
You are now seeing the specifications of this magnet ring OD 13mm, bore diameter 8mm, thickness of 3.5mm, the surface of the black epoxy, due to the reason of the photo may look like a ferrite, the actual bonded ring magnets, suitable for a variety of types of motor, sensor, and electric appliances....
This is a large-sized multi-pole ring magnet, which was originally shot by Chinese magnet supplier Courage Xiaofu. If you see it in other websites, it is completely copied from us. The size of this magnet is 70.2mm in outer diameter, 51.83mm in inner diameter, and 28mm in thickness (height). The largest magnetic surface is on the outer side of the ring...
This is a multi-pole neodymium magnetic ring made of bonded NdFeB material, hollow cylindrical with 6 poles, radial distribution of 3N3S, outer diameter 12mm, center hole 8mm, height 20mm, surface magnetic strength of about 1750 gauss...
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....
This is a single-sided multi-pole magnetized ring magnet, only one side is magnetic, there are 4 poles on the surface, 2 N-pole, 2 S-pole, the material is injection molded ferrite, the outer diameter size of 17mm, the thickness of 4.5mm...