0769-23388351
Toggle Navigation
Thin magnets, we usually refer to magnets with a thickness of less than 1mm. Depending on the shape, they can be thin rectangular magnets, thin square magnets, thin circular magnets, long thin magnets, and paper thin magnets. How thin can these thin magnets be made? Have you ever bought such a thin magnet?
How thin can thin magnets be processed by magnet manufacturers?
Different magnet manufacturers have different processing strengths, and the material of magnets is also on the one hand. For example, it is more difficult to process ferrites that are too thin. The thickness of the thin magnets of our courage magnet manufacturer NdFeB (Neodymium) magnets can be 0.5 mm, the thickness of the ferrite thin magnet sheet can be processed to 0.65mm, if it is round, the diameter should not be too large, and the size of the block magnet, length and width should not be too large.
The above is the introduction of the minimum thickness of thin magnets that can be processed. If you need to buy this ultra-thin neodymium magnet or ferrite magnet, you can contact us, and we have the ability to process and customize it for you.
Successful cases of thin magnets processed for customers;
Neodymium powerful thin magnet
Physical samples of ferrite thin magnets;
Thin ceramic magnet with thickness less than 1mm 40x20x0.65
This product is round ferrite magnet with a diameter of 9mm and a thickness of 3mm, the performance class is Y30, magnetized in the thickness direction, without electroplating protective layer, the magnetic force is usually 700-1000gs, the working temperature is -40°C to +250°C, Suitable for sensors, suction parts, electrical appliances, Hall induction....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
This is a C8 grade ceramic ferrite block rectangle, with white marks made according to the customer's requirements. The magnet size is 13mm long, 11mm wide and 10mm thick. If you are interested in such a magnet, you can contact us to provide you with samples, prices,...
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....