0769-23388351
Toggle Navigation
Today, when I was visiting a motor forum, I found that a netizen asked how to choose the magnetic steel of the brushless DC motor? What are the effects of the remanence, coercive force and magnetic energy product of the magnetic steel in the brushless DC motor on the performance of the magnetic steel? Then there is how to select the correct magnetic steel performance parameters according to the conditions of the motor. If the parameters such as remanence are the same, what is the difference between ferrite and rare earth?
This is almost the case. In the magnetic steel, the residual magnetism br refers to the magnetic induction intensity of the magnet at this time after the magnetic field is magnetized to the technical saturation under the action of the external magnetic field of the magnet. ) Intrinsic coercive force HCJ refers to the reverse magnetic field strength required to reduce the magnetization of the magnet to zero, (whether the magnet can continue to work at high temperature and how much temperature it can withstand, mainly depends on HCJ) Magnetic energy product (BH) max refers to the product of B and H at any point in the demagnetization curve, and the maximum value of BXH is called the maximum magnetic energy product. (Comprehensive parameters, the selection of magnetic steel mainly depends on BR and HCJ)
What kind of magnet should the bldc motor choose?
This mainly depends on the comprehensive consideration of your application field, power, maximum operating temperature, and even original design experience, Generally, more neodymium arc magnets are used.
What is the difference between ferrite and rare earth magnets?
Both ferrite and rare earth neodymium magnets belong to permanent magnets. Permanent magnets are a general term. Sintered ferrite magnets, injection molded ferrites, sintered NdFeB magnets, bonded NdFeB magnets, etc. are all types of permanent magnets. The magnetic properties, plasticity, machinability and economy of various materials are different, depending on how you choose.
The above motor magnets can be customized by our company. Customers with drawings are welcome to send drawings to our business for quotation, and look forward to your consultation.
Brushless motors may also use the following magnets;
This product is a convex neodymium magnet with holes, which is a non-standard customized special-shaped magnet. It is provided by the Karich magnet manufacturer in China. You can determine the size, grade, coating, and resistance of the convex magnet according to the needs of your own products. Wen, we are very much looking forward to your inquiry....
This product is a round ceramic magnet with a diameter of 5mm and a thickness of 3mm. It is a small round magnet. It is provided by the Karich magnet manufacturer in China. It is suitable for electronic components, sensors, instruments, and electronic products. Corrosion, cheap and other characteristics....
This is an annular ferrite magnet used for audio speakers. It is black in appearance, Y25 in performance grade, and has no surface treatment. Its size is 32mm in outer diameter, 18mm in internal control, and 6mm in thickness. It can also be used for machinery, family, teaching, toys and other purposes. You are welcome to make inquiries....
This is a small neodymium round magnet with 3 small holes, like the buttons on our clothes, with galvanized surface, these holes on the top of the magnet are usually used for mounting or fixing the magnet,...
Most of the epoxy magnets we have seen are black, that is, black epoxy magnets. In fact, it can also have other colors, such as gray, red, blue, green, etc. If you like this kind of magnet, please give us feedback. The size and performance grade can be customized....
This is a kind of heterosexual ferrite magnet provided by Chinese Carici magnet factory, black, the size is 13.8mm in diameter, 4.9mm in thickness, the direction of thickness magnetization, one side of the magnet has a concave point for filling glue, mainly used for magnetic clamp, customers interested in this product welcome to email to consult....
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
This is a single-sided multi-pole magnetized ring magnet, only one side is magnetic, there are 4 poles on the surface, 2 N-pole, 2 S-pole, the material is injection molded ferrite, the outer diameter size of 17mm, the thickness of 4.5mm...