0769-23388351
Toggle Navigation
What is the Curie temperature of a permanent ferrite magnet? What is the demagnetization temperature? Before answering this question, let's take a look at an introduction to the Curie temperature.
What is the Curie temperature?
Curie temperature refers to the temperature at which a material can change between a ferromagnet and a paramagnet. Below the Curie temperature, the substance becomes a ferromagnet, and the magnetic field associated with the material is difficult to change. When the temperature is higher than the Curie temperature, The substance becomes a paramagnet, and the magnetic field of the magnet is easily changed with the change of the surrounding magnetic field.
The picture is a multi-pole magnetized ring ferrite
What is the Curie temperature of a permanent magnet ferrite?
It is reported that the Curie temperature of ferrite is around 450°C, usually greater than or equal to 450°C, and the hardness is around 480-580.
How to demagnetize ferrite magnet?
If the ferrite is demagnetized, it is more troublesome, because the required temperature is very high, and if it needs to be demagnetized, it needs to be heated to 900 ℃ and reheated. Just above the Curie point is not clean. If you want to retreat, you can use the method of AC attenuation to demagnetize.
Curie temperature introduction of other magnets;
Maximum working temperature and Curie temperature of neodymium magnet
This product is a customized countersunk magnet ring, made of rare earth neodymium iron boron, 17mm outer diameter, black nickel plating on the surface, compared with ordinary nickel plating....
This product is a radial multi-pole ferrite rotor magnetic ring, photographed by Xiao Fu, a Courage magnet manufacturer in China. The magnet has 12 magnetic poles, 6 N poles and 6 S poles, and the magnetic field intensity can reach 1700 Gauss. The specific size of the magnet is 18mm outer diameter, 10mm aperture and 17.5mm height, and it is mainly used for permanent magnet DC motor....
This is a samarium-cobalt round magnet with counterbore. The size is 15mm in outer diameter, 5mm in thickness, magnetized in the thickness direction, and no other coating on the surface. Customers who need our quotation for you are welcome to consult and can be customized....
This is a medium and large size countersunk square magnet, made of rare earth neodymium material, with strong magnetic field strength, magnet length and width size is 40mm, thickness 10mm....
This is a thin ferrite magnet sheet customized for American customers not long ago, hard permanent magnet, rectangular shape, no plating on the surface, black, length 40mm, width 20mm, thickness 1mm, magnetization through the thickness of 1mm direction....
This product is a small-size circular ferrite magnet with a diameter of 10mm and a thickness of 2mm. It is magnetized with thickness and no other treatment on the surface. It is suitable for electronic products, industry and induction devices. If you need to process ultra-thin ferrite magnets, please contact us for quotation....
You are now viewing this is a high grade (N50) hollow cylindrical magnet with a through hole drilled in the middle of a cylindrical neodymium magnet, OD size 7.5mm, hole 3mm, height 30mm....
This is a special magnetic ring for magnetic encoder, the material is injection molded ferrite, the surface has a raised structure, the outer diameter is 34.1mm, the hole is 18mm, the total thickness is 3mm, single side multi-pole magnetization (62 and 64 poles)....