0769-23388351

How much does it cost to custom magnets? Is there need mold fee?

Addtime:2022-06-20 13:40:15 Click:322

What? Need customization? Many customers are sensitive to the customization of magnets. They think that customization will be very expensive. Then they go on to the next one. The next one starts to ask. Today, Xiaobian will tell you about the cost of customizing magnets and whether there is a mold fee for customizing magnets.


How much is the custom-made magnet?

Custom shape hexagonal cylindrical neodymium permanent magnet

Custom shape hexagonal cylindrical neodymium permanent magnet


The customization cost of magnets is not certain. It depends on the material, size, performance level, processing difficulty and quantity of magnets you need. For neodymium magnets (neodymium iron boron magnets), the customization cost is generally from 100 yuan. If some of them are oversized, it may cost one or two thousand yuan. For ferrites, the customization cost is relatively high, because the same-sex magnets are cheaper when it comes to molds. Most of them are tens of thousands of yuan.


Do you charge mold fees for custom magnets?

Not necessarily. Customized sintered Nd-Fe-B powerful magnets and samarium cobalt magnets do not require mold fees, and can be directly processed. Customized bonded Nd-Fe-B magnets require mold fees. For ferrites, such as sintered ferrite, injection ferrite is the need for mold processing, customization is undoubtedly to mold fee.


The above is about how much is the custom-made magnet? Is there any mold fee for customization? Related introduction, our company can provide a variety of ultra-thin, precision, special-shaped, multipole, high-performance magnets customized. If you need to process magnets, you are welcome to inquire and quote.


Customized magnet related articles;

What parameters should be provided for custom neodymium strong magnets?


Customized magnet products;

Special Shaped Magnets

Tags: Custom magnet
MAGNET PRODUCT RECOMMENDATION

Super Thin Rectangular NdFeb Magnets 40x25x1.5mm

This is a thin rectangular block neodymium magnet, the specific specifications are length 40mm, width 25mm, thickness 1.5mm, strong magnetic force, N35 grade, magnetized in the thickness direction, suitable for ceiling lamps, crafts, home furnishing, electronic products, can be matched with 3M back glue to use....

N35M 11mm OD x 2mm ID x 5mm H Ring Magnet 11x2x5

This is a small size ring rare earth magnet, N38M grade, the outer diameter of the ring is 11mm, the hole is 2mm, which is also relatively small, the thickness is 5mm, the surface is plated with bright nickel, this type of magnet is suitable for passing through some thin shafts....

10x2mm N52 neodymium disk magnets 2430 gauss weight 1.2g

This is a very hot neodymium round magnet size, diameter 10mm, thickness 2mm, in many areas can be applied, the only difference is that different customers choose the coating, performance level and temperature resistance performance on the difference, the magnet weighs about 1.2g....

Bowl shaped neodymium magnet [ picture price custom ]

This product is a bowl-shaped magnet, because its shape is like the rice we eat. It is processed into a concave shape on the basis of a circular magnet, which belongs to the special-shaped magnet category. Our company is good at processing various complex special-shaped neodymium magnets. Welcome to all over the world. Customer service....

2 inch rare earth magnet ring middle hole 40mm thick 5mm

This is a ring magnet with an outside diameter of about 2 inches, belongs to medium size, made of rare earth neodymium material, the hole in the center is 40mm, thickness 5mm, the customer chooses N38 grade,...

Y30 C8 Ferrite Disc Magnets 18mm x 8mm 1320 gauss

Product is a Y30 (C8) grade round ferrite magnet, the N pole has a pit, the surface magnetic field strength is about 1300 Gauss, the specific size is 18mm in diameter, 8mm in thickness, magnetized in the thickness direction, and the tolerance is ±0.1mm....

4" Ferrite magnet ring C8 OD 110mm ID 50mm T 6mm 110x50x6mm

You are now browsing this is a 4 inch ceramic ferrite ring magnet, by the courage magnet manufacturers physical samples photographed, magnetic ring outer diameter 110mm, hole 50mm, thickness 6mm....

80mm x 10mm larger size round neodymium magnets 80x10mm

You are now browsing this magnet is the diameter of 80mm series of round rare earth magnets, the thickness of 10mm, nickel-plated surface, the thickness of the magnetization....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW