0769-23388351
Toggle Navigation
It is controversial whether neodymium iron boron magnets have magnetism as soon as they are produced. Some people think that magnets have magnetism as soon as they are made, while others think that they have no magnetism. Today, Xiao Fu from Courage Magnet Factory came to popularize this knowledge.
Does NdFeB neodymium magnet have magnetism when it is produced?
No, The newly cut magnet is not magnetized, so you need to use a magnetizing device（Magnetizer） to magnetize the magnet.
In which link is NdFeB magnet magnetized?
If the customer requires magnetizing for delivery, the last process is to put the qualified neodymium magnet into the magnetizing coil and turn it into a magnetic field through current, so the magnetizing is completed after the electroplating.
Points needing special attention:
The most important magnetization direction of the magnet is the magnetization direction. Once the magnetization direction is wrong, you can only take it for demagnetization, which is time-consuming, laborious and expensive.
The above is about whether introduce the magnet is magnetic after production . Our company mainly sells various micro precision magnets, multipole ring magnets, motor arc magnets, etc. Welcome to inquire about the price.
Guess you also pay attention to the following magnetization related issues;
Can the axially magnetized magnet be demagnetized for radial magnetization?
Axial 2 pole magnetization schematic sharing
Is the magnet magnetization waveform sine wave or square wave good?
This product is round ferrite magnet with a diameter of 9mm and a thickness of 3mm, the performance class is Y30, magnetized in the thickness direction, without electroplating protective layer, the magnetic force is usually 700-1000gs, the working temperature is -40°C to +250°C, Suitable for sensors, suction parts, electrical appliances, Hall induction....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
This is a C8 grade ceramic ferrite block rectangle, with white marks made according to the customer's requirements. The magnet size is 13mm long, 11mm wide and 10mm thick. If you are interested in such a magnet, you can contact us to provide you with samples, prices,...
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....