0769-23388351
Toggle Navigation
Whether you want a large industrial magnet or a small precision magnet, we can meet your requirements on the size, tolerance, coating and temperature resistance of the magnet. What you need to do is to tell us the required technical requirements of the magnet. Today, we will introduce the surface magnetism and pull strength size of the 6mm circular rare earth magnet.
6mm diameter magnet is especially suitable for all walks of life need magnetic products, generally thin can be processed to 1mm below, thickness customers generally choose 1-5mm more, the following is a small series of several common specifications of the surface magnetic field strength and tension, for reference only.
The picture below is a 6mm diameter rare earth round magnet
A round thin neodymium magnet with a diameter of 6mm and a thickness of 1mm has a magnetic strength of about 1700 Gauss and a vertical pull of about 0.34kg.
A round neodymium magnet with a diameter of 6mm and a thickness of 1mm has a magnetic strength of about 1700 Gauss and a vertical pull of about 0.34kg.
n42 grade neodymium circular magnetic diameter of 6mm, thickness of 0.5mm, surface gauss about 900 gauss, vertical tension about 0.2kg.
Diameter of 6mm, thickness of 3mm circular NdFeb magnet (N35) Gaussian value is about 3480, vertical tension is about 0.67kg.
A 6mm diameter, 4mm thickness circular neodymium magnet has a gauss value of about 4190 Gauss and a vertical pull of about 1kg.
The 6mm diameter, 5mm thick round plate neodymium strong magnet has a gauss value of about 4470 Gauss and a vertical pull of about 1.18kg.
Note: Only the vertical direction can give full play to the maximum tension, too far away from the adsorption magnetic force will be greatly reduced, used in high temperature environment need to replace high temperature resistant magnet material.
In addition, we also launched the surface magnetic strength calculation and pull force calculation tools.
6mm diameter neodymium magnet products recommended;
Nail art magnet Nail polish magnet OD6mm x 30mm
Neodymium Super Magnet Round Dia 6mm x 5mm
N52 6mm x 6mm cylinder neodymium magnet 4820 gauss
Content related articles;
This product is round ferrite magnet with a diameter of 9mm and a thickness of 3mm, the performance class is Y30, magnetized in the thickness direction, without electroplating protective layer, the magnetic force is usually 700-1000gs, the working temperature is -40°C to +250°C, Suitable for sensors, suction parts, electrical appliances, Hall induction....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
Flat magnets can be flat square magnets or round magnets. Today's sample is a flat rectangular magnet, with a length of 20mm, a width of 10mm, a thickness of 1.5mm, and a zinc coating on the surface. Thickness magnetization is used for thin workpieces. The use of this relatively flat neodymium rectangular magnet requires special attention....
Looking for suppliers of radial 16 pole ring magnet and multi-level magnetic ring, welcome to contact carrich magnet manufacturers in China. We have more than 10 years of experience in the motor magnet industry. Our products have many specifications and good performance, which are highly praised by customers at home and abroad. We welcome to provide specifications, samples and batch prices....
This is a dedicated to screwdrivers, drills on top of the ring magnet, the material is rare earth neodymium, N38 grade, outer diameter 15mm, height 10mm. hole diameter 7mm, the use of very simple, is to set the magnetic ring in the screwdriver (screwdriver head) on top of the purchase of the hole is recommended to be larger 1mm....
Product name: 9.5mm diameter thickness 1.5mm neodymium intense magnetic，Type of magnet: permanent magnet，Magnet shape: Round，Magnet class: n45，Tolerance: ±0.05，Coating: conventional nickel copper nickel，Pull: About 1.6 pounds，Magnetic strength: about 2200 Gauss....
This is a C8 grade ceramic ferrite block rectangle, with white marks made according to the customer's requirements. The magnet size is 13mm long, 11mm wide and 10mm thick. If you are interested in such a magnet, you can contact us to provide you with samples, prices,...
This is a 6-pole ring magnet made of injection molded ferrite, with an outer diameter of 9.5mm, an inner hole of 1mm, a thickness of 2mm, single-sided 6-pole magnetization, 3 N poles and 3 S poles. It is mainly used for Hall encoder....