0769-23388351
Toggle Navigation
What does magnet br mean? Are higher Br values better? What is the magnet br value 1t? Do you also want to know about these 3 questions? Today, Courage Magnet Manufacturers in China is here to share with you.... ...More>>
To see if the quality of a magnet is good, you can tell by the tolerance. Some netizens asked what is the tolerance of the magnet? Can custom magnet tolerances be made? Is it possible to achieve zero tolerance? Let's talk to you below.... ...More>>
Can the magnet be made more flat than 0.8mm? Of course no problem, the thickness of the strong block/round flat magnet can be mass produced about 0.5mm.... ...More>>
Radial ferrite magnet, a kind of ferrite magnet with radial magnetization method, mainly radially charged, belongs to permanent magnet type, has good high temperature resistance, the strong magnetic surface is on the outer side of the magnet, and has a solid heel. There are 2 types of hollow rings. The radial ferrite magnets currently on the market are basically ring-shaped, with 2, 4, and 8 poles. .... ...More>>
According to data from the United States Geological Survey, the global rare earth reserves in 2022 will be about 125 million tons, of which China's reserves are 44 million tons, accounting for about 35% of the world. In addition, Vietnam, Russia, and Brazil have the highest rare earth reserves at 22 million tons, 21 million tons and 21 million tons respectively. The above four countries account for 87% of the global rare earth reserves.... ...More>>
What is the Curie temperature of a permanent magnet ferrite?It is reported that the Curie temperature of ferrite is around 450°C, usually greater than or equal to 450°C, and the hardness is around 480-580.... ...More>>
​The smallest rare earth neodymium magnet is only a few hundred gauss, the large and thick magnet can reach 5000-6000 gauss, the general combination is 12000-13000 gauss, and the special combination may reach 15000-18000 gauss, or even higher.... ...More>>
Since most of the motor magnets use multiple arc-shaped wedge magnets, they need to be bonded and fixed, so they need to be glued. So what kind of glue should be used, and which brand of adhesive is better? Today, the Chinese magnet supplier Courage will introduce to you.... ...More>>
This mainly depends on the comprehensive consideration of your application field, power, maximum operating temperature, and even original design experience, Generally, more neodymium arc magnets are used.... ...More>>
Radial ring magnets include sintered rare earth magnets, sintered ferrite magnets, hot-pressed/heat-deformed magnets and bonded magnets. This article will introduce the application and advantages of radially magnetized toroidal magnets in motors.... ...More>>